Pre-glued Veneer Edging

Denge produces veneer edging with hot melt adhesive.

Pre-gluing Process

With the hot melt adhesive, it is possible to stick the edging to the panel with heat activation. The activation could be done with an standard iron or with a hot air blower.

The amount of hot melt adhesive applied to square meter during the gluing process is about 300 gr / m2. Only high quality of glue is used during the application in order to provide the best experience to the carpenter.

The width of pre-glued rolls can vary from 18mm up to 200mm. The standard length of the roll is 50mt; yet, it could be changed if demanded by the customer.

For more information, please get it in touch with us.

Denge Tweet